Kit-S5PV210, S5PV210 Development kits CoreWind Technology

Features

SAMSUNG S5PV210 Dual-core ARM Cortex-A8, 1Ghz
1GB DDR2 RAM
256MB Nand Flash
Android 2.3 Gingerbread
Support HDMI/LCD/Camera
Support Audio In Out
Support 7.0 inch LCD with Capacitive touchscreen
Support 3 low-g Acceleration Sensor
All source code provide

Hardware

CPU board- CM-S5PV210
Detailed pin explanation for the expansion connectors are as following: SAMSUNG S5PV210 Dual-core ARM Cortex-A8, 1Ghz High-performance graphics engine built-in PowerVR SGX540 2D/3D graphics acceleration Supports up to 1080p @ 30fps hardware decoding and smooth video playback, the format can be MPEG4, H.263, H.264 Supports up to 1080p @ 30fps the hardware encoding (Mpeg-2/VC1,) video input 1GB DDR2 RAM + 256MB Nand Flash Supports for Android 2.3 and Linux 2.6.35 operating systems Working Temperature: 0 to + 70 Celsius
Mother board: Kit-S5PV210 Development kits
Video out HDMI interface: supports 1080p via HDMI cable (H.264+AAC based MP4 container format) TFT LCD Interface: Support 5.0"LCD, 7"LCD TV-Out: RCA interface Touch Screen: Support Resistive touch screen and Capacitive touch screen Video In CMOS camera interface: Support 130W/300W CMOS camera module Audio Audio In/Out interface: standard 3.5mm headphone MIC input: on-board microphone 1 external speaker Interface Block (direct drive 8Ω 2W speaker) Data I/O Serial port: 2 RS232 Serial Port 3 TTL Serial Port(Reuse with the RS232 Serial port) USB port: 4 x USB Host 2.0 1 x USB OTG 2.0 Ethernet 10/100Mbps NET, RJ45, Use smsc9220 USB WiFi, provide for free JTAG interface: 20pin 2.0mm standard JTAG interface Extend interface: 8x 8 Matrix Key interface A GPIO interface: 40pin, 2.0mm pitch, contains a surplus of AD input, the interrupt pin, I2S, I2C, SPI,, the PWM port input / output On-Board Resource: An I2C-EEPROM chip (256byte), mainly used to test the I2C bus 4 LED (red) 8 phone key (interrupt resources pin, clearly marked with the function corresponding to at android) A reset button 2 TF-card slot On-board real-time clock backup battery An I2C three-axis gravity acceleration sensor Extend Module USB WiFi Mechanical Dimensions: 133x 171mm Input Voltage:5V Temperature Range: 0 ~ 70	Kit-S5PV210 interface(Click to enlarge)

Software

Android System

Boot loader

verison: U-Boot-1.3.4
Function: Support Update system by fastboot

Linux kernel

verison: s3c-Linux-2.6.35
Compile: arm-2009q3-67-arm-none-linux-gnueabi-
Function: support MFC, Jpeg encode, 2D/3D

Android system

Android version: android 2.3

Device Driver

TFT LCD, Touchscreen, VGA, HDMI, Audio In/Out
TF-card, IIC, SPI, Keyboard, DMA, RTC, USB Host/Device.
JPEG, MFC, ROTATOR, 2D/3D, ,
NET, 3G Module, GPRS, GPS, WiFi, Bluetooth, USB ADB,
RTC, LED, Key, SPI, PWM, ADC,NET
USB Host: USB WiFi, USB Hub
I2C three-axis gravity acceleration sensor

File System support

yaffs2 file system, can be read and written

Resource

Developers' Resources

Join and share full development resources of Kit-S5PV210

Getting Start for Kit-S5PV210

Relative Documents

Board Picture

	Capacitive touchscreen
Kit-S5PV210 + 5.0"LCD	Kit-S5PV210 + 7.0"LCD	Kit-S5PV210 size

Oder Information

Order No.	KIT04
Item	Kit-S5PV210 Development kit
Contents	Kit-S5PV210 Development Kits contents: One Kit-S5PV210 Development Kits One Serial cable One net cable One Mini-USB cable One 5V@2A Power adapter One CD USB WiFI 4GB TF-Card Option Module LCD Module( 7.0"LCD, Support Capacitive touchscreen) LCD Module( 5.0"LCD, Support Resistive touchscreen ) USB WiFI(provide for free)
Data in CD	Documents (user manual, Datasheet, Schematic) Linux 2.6.35 BSP Android 2.3 source code

Notice: Click here to get the price and buy it online.

For more information see